| Dryer |
|
|
SMC Dryer IDG10-F03 is a polymer film air dryer with the following characteristics: High efficiency water removal: The use of polymer hollow diaphragm technology, high water removal efficiency, the atmospheric pressure dew point of the output air is as low as -60 ℃, which can effectively remove water in the air and ensure that the air source is dry. Energy saving and environmental protection: does not rely on external power supply, does not use freon, no vibration, no heat discharge during operation, both reduce energy consumption, and meet the requirements of environmental protection. Easy maintenance: The overall structure is simple, there is no need for drainage, and the standard type is equipped with a dew point indicator, which is convenient for the staff to monitor the operating status of the equipment and the degree of air dryness at any time, effectively reducing maintenance costs and downtime. Easy installation: The device is small in size, light in weight, and easy to install and arrange. It can be used in combination with pre-filters (such as oil mist separators and micro-fog separators), which is suitable for various installation scenarios and air source treatment requirements. Operating parameters: Suitable for compressed air, inlet air temperature range of -5 ~ 55℃, inlet air pressure of 0.3 ~ 0.85MPa, ambient temperature of -5 ~ 55℃. Under the benchmark performance, the inlet air flow is 125L/min (ANR), the outlet air flow is 100L/min (ANR), and the shunt air flow is 25L/min (ANR). Interface specification: Thread type is G, nozzle diameter is 3/8 inch. |
SMC |
In Stock |
QB全新保内 |
|
|
|
|
SMC Dryer IDG10-02 is a polymer film air dryer with the following characteristics: Efficient water removal: Using the characteristics of polymer film, high water removal rate, can reduce the atmospheric pressure dew point of the output air to -60 ℃. Energy saving and environmental protection: no power supply, no freon, no vibration, no heat discharge, both energy saving and environmental protection. Easy maintenance: simple structure, no need for drainage, with dew point indicator, easy observation and maintenance, can reduce maintenance costs and downtime. Easy installation: small size, light weight, can be combined with pre-filter (oil mist separator and micro fog separator), suitable for electronics, chemical, pharmaceutical, food and other industries with high dry environment requirements. Working range: The fluid used is compressed air, the inlet air temperature is -5 ~ 55℃, the inlet air pressure is 0.3 ~ 0.85MPa, and the ambient temperature is -5 ~ 55℃. Under the benchmark performance, the inlet air flow is 125L/min (ANR), the outlet air flow is 100L/min (ANR), and the shunt air flow is 25L/min (ANR). |
SMC |
In Stock |
QB全新保内 |
|
|
|
|
SMC freezer dryer IDFA8E-23 is suitable for industrial air source treatment scenarios. The working power supply is single-phase AC230V (50Hz), and the power adaptation is reasonable. Can cope with the intake temperature of 5-50 ℃, the intake pressure range is 0.15-1.0MPa, can operate stably in the environment of 2-40 ℃ and relative humidity below 85%, the refrigerant uses R134a, environmental protection and reliable. Structure, the use of stainless steel plate heat exchanger, corrosion resistance and dust resistance, with the float type open air drain automatic drainage. The inlet pipe diameter is RC1, and the air flow rate is 800-1100L /min, which can cool the compressed air to the pressure dew point of 2-10 ℃, effectively dehumidification, avoid frost at the outlet, and ensure the output of high-quality dry air source. |
SMC |
In Stock |
QB全新保内 |
|
|
|
|
SMC freezer dryer IDFA6E-23 is specially designed for compressed air treatment, suitable for a variety of industrial scenarios, can effectively improve the quality of air source. It has the following features: Operating parameters: The power supply is single-phase AC230V (50Hz), and the power is properly adapted. It can handle the intake temperature of 5-50 ° C, the intake pressure range is 0.15-1.0MPa, the ambient temperature is 2-40 ° C, and the relative humidity is below 85%. The refrigerant uses environmentally friendly R134a (HFC), which meets the needs of green environmental protection. Structure and material: Stainless steel plate heat exchanger, with strong corrosion resistance, can effectively prevent the heat exchanger dust, prolong the service life of the equipment. With the float type normally open air drainer, it can automatically and efficiently drain water and reduce the frequency of manual maintenance. Performance highlights: The air inlet pipe diameter of the equipment is RC 3/4, and the air flow rate can reach 600-833L /min. By precooling, cooling and reheating the air through the heat exchanger, the compressed air can be cooled to the pressure dew point of 2-10 ° C, efficient dehumidification, ensuring the output of dry air, and preventing the emergence of frost at the outlet. |
SMC |
In Stock |
QB全新保内 |
|
|
|
|
SMC Dryer IDG30A-03B is a polymer film air dryer with the following characteristics: High efficiency dehumidification: With the help of polymer diaphragm technology, the water in the compressed air can be efficiently filtered, and the atmospheric pressure dew point of the output air can be reduced to -60 ℃ to ensure the high degree of drying of the air source. Energy saving and environmental protection: no external power supply is needed during operation, no freon refrigerant is used, no vibration and heat dissipation phenomenon, greatly reducing energy consumption and environmental impact. Easy maintenance: The overall structure is simple, no drain. Although the standard model is not equipped with a dew point indicator, the equipment is low maintenance difficulty, which can effectively reduce maintenance costs and downtime. Easy installation: small size, light weight, easy to install, can be used with pre-filter (such as oil mist separator, micro fog separator), suitable for a variety of installation space and air source treatment needs. It is special in that the "B" in the model indicates that it has a bracket and a splitter air discharge connection for easy installation and air splitter handling. Operating parameters: Suitable for compressed air, inlet air temperature range of -5 ~ 55℃, inlet pressure of 0.3 ~ 0.85MPa, ambient temperature of -5 ~ 55℃. Under the benchmark performance, the inlet air flow is 375L/min (ANR), the outlet air flow is 300L/min (ANR), and the shunt air flow is 75L/min (ANR). Interface specification: Thread type is Rc, nozzle diameter is 3/8 inch. |
SMC |
In Stock |
QB全新保内 |
|
|
|
|
|
SMC |
In Stock |
QB全新保内 |
|
|
|
|
SMC's ID606-06B is part of the ID series of non-regenerative air dryers designed for low dew point dry air. It has the following characteristics: Efficient dehumidification: It can supply dry air with dew point as low as -30°C and effectively remove moisture from compressed air, meeting the application scenarios with strict requirements on air source dryness, such as precision instruments, electronic manufacturing and other industries.Compact and light structure: no heater and electric control board, the overall structure is simple, small size and light weight, easy to install and layout, can flexibly adapt to all kinds of work sites, especially the limited space environment. Easy maintenance: Self-regeneration method, through its own internal air circulation to achieve desiccant regeneration, daily maintenance work is greatly reduced; It can also easily check the outlet dew point with the indicator to grasp the working status of the dryer at all times. Specifications Good adaptability: The nozzle diameter is 3/4 inch, suitable for common pipe systems, easy to connect and integrate into the existing compressed air pipeline; The working pressure range is 0.3 to 1.0MPa, and the intake temperature is 5 to 50°C, which can adapt to a variety of working conditions. |
SMC |
In Stock |
QB全新保内 |
|
|
|
|
SMC Dryer IDF8E-20-G is a refrigerated air dryer with the following characteristics: High efficiency dehumidification: The principle of refrigeration dehumidification can reduce the dew point temperature of compressed air to 2-10 ℃, and the water removal rate is as high as 95.4-98%, which can effectively remove the water in compressed air and provide dry air source for the pneumatic system. Stable performance: can operate under 50/60Hz power supply, adapt to a variety of power environment; The maximum inlet air temperature is 50℃, which can meet the temperature conditions of compressed air in general industrial scenes. The maximum flow rate can reach 3.1m³/min (ANR) under rated conditions, which can meet the gas consumption requirements of certain scale pneumatic systems. Easy maintenance: The control system is simple, and the daily maintenance and maintenance work is more convenient, which can reduce the maintenance cost and equipment downtime. Good interface adaptation: The standard interface is NPT thread, and R/RC adapters are also available for easy connection with different types of piping systems and easy installation. Excellent material: stainless steel heat exchanger, with good corrosion resistance, can extend the service life of the equipment. |
SMC |
In Stock |
QB全新保内 |
|
|
|
|
SMC's IDFA15E1-23-G is a refrigerated air dryer designed for industrial compressed air drying with the following features:Efficient dehumidification: The use of refrigeration principle, can reduce the compressed air dew point temperature to 2-10℃, water removal rate of up to 95.4%-98%, for the pneumatic system to provide low water content of the air source, reduce the equipment failure and corrosion caused by water, can be widely used in the air source of high dryness requirements of the industry, such as electronic manufacturing, food and beverage, precision instruments. Stable operation: Suitable for 50Hz power supply, can work stably at 5-50℃ intake temperature, 0.15-1.0MPa intake pressure environment, adapt to most industrial site air source conditions; The air-cooled condenser ensures reliable heat dissipation in a variety of environments and ensures continuous operation of the equipment. Durable corrosion resistance: Stainless steel heat exchanger, greatly improve corrosion resistance, can cope with complex working conditions and a certain corrosive compressed air, extend the service life of equipment, reduce maintenance costs. Easy installation and maintenance: the standard interface is R/RC thread, and NPT adapter can also be provided to facilitate the connection of various pipelines; Float type (N.O) automatic drainer can discharge condensate in time to reduce manual intervention; The air filter prevents the condenser from blocking and can be removed and cleaned without tools. Good flow compatibility: The maximum flow can reach a certain scale under rated conditions (specific values can be referred to the product manual), to meet the needs of compressed air drying in various scales of industrial production. |
SMC |
In Stock |
QB全新保内 |
|
|
|
|
SMC's IDFA22E-23 is a refrigerated air dryer designed for industrial scenarios with the following features: Efficient dehumidification: Using the principle of refrigeration, the dew point temperature of compressed air is reduced to 2-10 ℃, the water removal rate is as high as 95.4-98%, effectively remove the water in compressed air, and provide high-quality dry air source for industries with strict requirements for air source dryness, such as electronic manufacturing, food and beverage, precision instruments, etc. Stable operation: Suitable for 50Hz power supply, it can operate stably under the inlet temperature of 5-50 ℃ and inlet pressure of 0.15-1.0MPa, meeting the air source conditions of most industrial sites. The use of air-cooled condenser can efficiently dissipate heat in a variety of environments to ensure continuous and stable operation of the equipment. Durable corrosion resistance: The use of stainless steel heat exchanger, significantly improve corrosion resistance, can cope with complex conditions and a certain corrosive compressed air, extend the service life of the equipment, reduce maintenance frequency and cost. Easy maintenance: equipped with float type (N.O) automatic drainer, can discharge condensate in time, reduce manual operation; Equipped with dust filter, can prevent condenser blocking, and no tools can be removed and cleaned, easy to maintain. Interface adaptation: The standard interface is R/RC thread, NPT adapter can also be provided, easy to connect with all kinds of pipeline systems, the installation process is simple and quick. Flow adaptation: The maximum flow can reach a certain scale under rated conditions (refer to the product manual for specific values), which can meet the needs of compressed air drying in various scales of industrial production. |
SMC |
In Stock |
QB全新保内 |
|
|
|
|
SMC's IDFA3E-23-G is a refrigerated air dryer designed for industrial compressed air drying. Its characteristics are as follows: Efficient dehumidification: Using the principle of refrigeration, the dew point temperature of compressed air is reduced to 2-10 ℃, and the water removal rate is as high as 95.4-98%, which can effectively remove the water in compressed air, and provide high-quality dry air source for industries requiring strict dryness of air source, such as electronic manufacturing, food and beverage, precision instruments, etc. Stable operation: suitable for 50Hz power supply, the operating voltage is single-phase 230V AC; It can work stably at the inlet temperature of 5-50 ℃ and the inlet pressure of 0.15-1.0 MPa, meeting the air source conditions of most industrial sites. The use of air-cooled condenser can efficiently dissipate heat in a variety of environments to ensure continuous and stable operation of the equipment. Durable corrosion resistance: The internal stainless steel plate heat exchanger significantly improves corrosion resistance, can cope with complex working conditions and a certain corrosive compressed air, extend the service life of the equipment, reduce the maintenance frequency and cost. Easy maintenance: Equipped with float type (normally open) automatic drainer, can discharge condensate in time, reduce manual operation; Equipped with dust filter, can prevent condenser blocking, and no tools can be removed and cleaned, easy to maintain. Interface adaptation: The standard interface is Rc3/8 thread, which is convenient to connect with various pipeline systems, and the installation process is simple and quick. Flow adaptation: The outlet flow range is 200-283L /min (ANR), which can meet the compressed air drying needs of various scale industrial production. |
SMC |
In Stock |
QB全新保内 |
|
|
|
|
SMC refrigerated dryer IDFA4E-23 is mainly suitable for fine filtration of micro air compressors and equipment with high air source requirements. Its characteristics are as follows: Working parameters: single-phase AC230V (50Hz), power 180W, applicable air flow 24-35m³/h, intake temperature 5-50℃, intake pressure 0.15-1.0MPa, ambient temperature 2-40℃, relative humidity below 85%, refrigerant R134a. Structure design: stainless steel plate heat exchanger, corrosion resistance; Air cooled condenser with floating ball type open air drainer, can automatically drain water. Performance advantages: in line with EC directives, with CE certification; By precooling, cooling and reheating the air through the heat exchanger, the compressed air can be cooled to the pressure dew point of 2-10℃, effectively dehumidifying and avoiding frost at the outlet. |
SMC |
In Stock |
QB全新保内 |
|
|
|
|
SMC refrigerated dryer IDFA4E-23-ACG, designed for harsh industrial environment, suitable for micro air compressors, widely used in coordinate meters, foaming machines, electric control cabinets and other equipment with high air quality requirements. It has the following features: Strong adaptability of working parameters: The power supply is single-phase AC230V (50Hz), the power is 180W, and it can handle the air flow of 24-35m ³/h. Inlet air temperature range 5-50 ℃, inlet air pressure 0.15-1.0MPa, can adapt to 2-40 ℃, relative humidity below 85% of the environment, the refrigerant R134a, environmental protection and stable performance. Compact structure design: stainless steel plate heat exchanger is used to effectively improve corrosion resistance and ensure long-term stable operation; The air-cooled condenser is equipped with a floating ball normally open air drainer to realize automatic drainage and reduce manual maintenance. Excellent performance: in line with EC directives and with CE certification, reliable quality. The air is pre-cooled, cooled and reheated through the heat exchanger, which can cool the compressed air to the pressure dew point of 2-10 ℃, efficiently dehumidifying and preventing frosting at the outlet to ensure the output of dry and clean compressed air. |
SMC |
In Stock |
QB全新保内 |
|
|
|
|
SMC Freeze dryer IDFA8E-23-G is an air drying equipment suitable for industrial scenarios. Its characteristics are as follows: Operating parameters: single-phase AC230V (50Hz). It can handle the intake temperature of 5-50 ℃, the intake pressure range is 0.15-1.0MPa, and can operate stably in the environment of 2-40 ℃ and relative humidity below 85%. The refrigerant uses R134a. Structure design: stainless steel plate heat exchanger, corrosion resistant and dust proof. With float type normally open air drainer, can automatically drain water. Performance advantages: comply with EC directive, with CE certification. The inlet pipe diameter is RC1, and the air flow rate is 800-1100L /min, which can cool the compressed air to the pressure dew point of 2-10 ℃, efficiently dehumidification, avoid frost at the outlet, and provide high-quality dry air source for industrial equipment. |
SMC |
In Stock |
QB全新保内 |
|
|
|
|
SMC Dryer IDG100-04 is a polymer film air dryer. Its characteristics are as follows: High efficiency water removal: Using the excellent permeability and selectivity of polymer film, high dehumidification efficiency, can remove water in the air in a short time, and the atmospheric pressure dew point of the output air can reach -60 ℃. Energy saving and environmental protection: no power supply, no freon, no vibration, no heat discharge, both energy saving and environmental protection. Easy maintenance: simple structure, no need for drainage, and with dew point indicator (standard), easy observation and maintenance, can reduce maintenance costs and downtime. Easy installation: small size, light weight, can be combined with pre-filter (oil mist separator and micro fog separator), suitable for electronics, chemical, pharmaceutical, food and other industries with high dry environment requirements. |
SMC |
In Stock |
QB全新保内 |
|
|
|
|
SMC Dryer IDG10-03 is a polymer film air dryer with the following characteristics: High efficiency water removal: The use of polymer hollow diaphragm, high water removal rate, the output air atmospheric pressure dew point can reach -60 ℃. Energy saving and environmental protection: no freon, no power supply, no vibration, no heat discharge. Easy maintenance: simple structure, no drain, standard type with dew point indicator, easy to observe and maintain. Easy to install: small size, light weight, can be used in combination with pre-filter (oil mist separator and micro-fog separator). Working range: The fluid used is compressed air, the inlet air temperature is -5 ~ 55℃, the inlet air pressure is 0.3 ~ 0.85MPa, and the ambient temperature is -5 ~ 55℃. Under the benchmark performance, the inlet air flow is 125L/min (ANR), the outlet air flow is 100L/min (ANR), and the shunt air flow is 25L/min (ANR). Interface specifications: Thread type Rc, nozzle diameter 3/8 inch, if IDG10-03B-P with bracket and split air discharge adapter. |
SMC |
In Stock |
QB全新保内 |
|
|
|
|
SMC Dryer IDG100-F04 is a polymer film air dryer with the following characteristics: High efficiency water removal: Using the excellent permeability and selectivity of polymer film, high dehumidification efficiency, can remove water in the air in a short time, and the atmospheric pressure dew point of the output air can reach -60 ℃. Energy saving and environmental protection: no freon, no power supply, no vibration, no heat discharge. Easy maintenance: simple structure, no need for drainage, standard type with dew point indicator, easy observation and maintenance, can reduce maintenance costs and downtime. Easy to install: small size, light weight, can be used in combination with pre-filter (oil mist separator and micro-fog separator). Working range: The fluid used is compressed air, the inlet air temperature is -5 ~ 55℃, the inlet air pressure is 0.3 ~ 0.85MPa, and the ambient temperature is -5 ~ 55℃. Under the benchmark performance, the outlet air flow is 1000L/min (ANR), and the shunt air flow is about 140L/min (ANR). Interface specification: Thread type is G, nozzle diameter is 1/2 inch. |
SMC |
In Stock |
QB全新保内 |
|
|
|
|
SMC Dryer IDG100LA-03 is a polymer film air dryer with the following characteristics: Efficient water removal: The use of polymer film characteristics, high water removal rate, output air atmospheric pressure dew point up to -60 ℃. Energy saving and environmental protection: no freon, no power supply, no vibration, no heat discharge. Easy maintenance: simple structure, no drain, standard type with dew point indicator, easy to observe and maintain. Easy to install: small size, light weight, can be used in combination with pre-filter. Working range: The fluid used is compressed air, the inlet air temperature is -5 ~ 55℃, the inlet air pressure is 0.3 ~ 0.85MPa, and the ambient temperature is -5 ~ 55℃. Interface specification: Thread type is Rc, nozzle diameter is 3/8 inch. |
SMC |
In Stock |
QB全新保内 |
|
|
|
|
SMC Dryer IDG100LA-04 is a polymer film air dryer with many practical features: High efficiency dehumidification: The use of polymer hollow diaphragm technology, high water removal efficiency, can output air atmospheric pressure dew point as low as -60 ℃, effectively remove moisture in the air, to ensure that the air source dry. Energy saving and environmental protection: no external power supply, no freon, no vibration, no heat discharge during operation, in line with the concept of green energy saving, reduce energy consumption and environmental impact. Easy maintenance: The overall structure design is simple, without the need for drainage. The standard configuration comes with a dew point indicator, which makes it easy for the staff to observe the operating status of the equipment and the degree of air dryness at any time, greatly reducing maintenance costs and downtime. Easy installation: Its small size, light weight, convenient installation layout. It can also be flexibly combined with pre-filters (such as oil mist separators and micro-fog separators) for a variety of installation Spaces and air source handling requirements. Working parameters: The fluid used is compressed air, the inlet air temperature range is -5 ~ 55℃, the inlet air pressure is 0.3 ~ 0.85MPa, and the ambient temperature is -5 ~ 55℃. Under the benchmark performance, the outlet air flow is 300L/min (ANR), and the shunt air flow is about 40L/min (ANR). Interface specification: Thread type is Rc, nozzle diameter is 1/2 inch. |
SMC |
In Stock |
QB全新保内 |
|
|
|
|
SMC Dryer IDG1-02 is a polymer film air dryer with the following features: High efficiency water removal: Using the special properties of polymer film, efficient removal of water in the air, the atmospheric pressure dew point of the output air can reach -60 ℃, effectively ensuring the drying of the air source. Energy saving and environmental protection: no external power supply, no freon, no vibration, no heat discharge during operation, in line with the concept of environmental protection and energy saving, reduce energy consumption and environmental impact. Easy maintenance: simple structure design, no drain. Although there is no dew point indicator, the overall maintenance difficulty is low, which can effectively reduce maintenance costs and downtime. Easy installation: small size, light weight, easy to install. It can be used in combination with pre-filter (oil mist separator and micro-fog separator) to adapt to various installation scenarios and air source treatment requirements. Operating parameters: The fluid used is compressed air, the inlet air temperature is -5 ~ 55℃, the inlet air pressure is 0.3 ~ 0.85MPa, and the ambient temperature is -5 ~ 55℃. Under the benchmark performance, the inlet air flow is 12.5L/min (ANR), the outlet air flow is 10L/min (ANR), and the shunt air flow is 2.5L/min (ANR). Interface specification: Thread type is Rc, nozzle diameter is 1/4 inch. |
SMC |
In Stock |
QB全新保内 |
|
|
|
|
SMC Dryer IDG10H-02B is a polymer film air dryer with the following characteristics: High efficiency water removal: Using the characteristics of polymer film, it can efficiently remove water in the air, and the atmospheric pressure dew point of the output air can reach -60 ℃. Energy saving and environmental protection: no external power supply, no freon, no vibration and no heat discharge during operation. Easy maintenance: simple structure, no drain, standard type with dew point indicator, easy to observe and maintain. Easy installation: small size, light weight, can be combined with pre-filter (oil mist separator and micro fog separator), easy installation. Working range: The fluid used is compressed air, the inlet air temperature is -5 ~ 55℃, the inlet air pressure is 0.3 ~ 0.85MPa, and the ambient temperature is -5 ~ 55℃. Interface specification: Thread type is Rc, nozzle diameter is 1/4 inch. |
SMC |
In Stock |
QB全新保内 |
|
|
|
|
SMC Dryer ID2020-03 is a haplic polymer film air dryer with the following characteristics: High efficiency water removal: Using the excellent permeability and selectivity of polymer membrane, high water removal efficiency, and the output air atmospheric pressure dew point can reach -60 ℃. Energy saving and environmental protection: no freon, no external power supply, no vibration, no heat discharge. Easy maintenance: simple structure, no drain, standard type with dew point indicator, easy to observe and maintain. Easy installation: small size, light weight, can be combined with the pre-filter, easy to install. Working range: The fluid used is compressed air, the inlet air temperature is -5 ~ 55℃, the inlet air pressure is 0.3 ~ 0.85MPa, and the ambient temperature is -5 ~ 55℃. Interface specification: Thread type is Rc, nozzle diameter is 3/8 inch. |
SMC |
In Stock |
QB全新保内 |
|
|
|
|
SMC Dryer IDG3-01 is a polymer film air dryer with the following features: High efficiency dehumidification: The use of polymer diaphragm technology can efficiently remove water in the air, and the atmospheric pressure dew point of the output air can reach -60 ℃, effectively ensuring the drying of the air source. Energy saving and environmental protection: no external power supply, no freon, no vibration, no heat discharge during operation, in line with environmental protection and energy saving requirements. Easy maintenance: simple structure, no drain. However, IDG3-01 belongs to the IDG1-5 series, and the standard model does not have a dew point indicator, but the overall maintenance difficulty is still low, which can reduce maintenance costs and downtime. Easy installation: Small size, light weight, easy installation layout, can be combined with pre-filter (such as oil mist separator and micro-fog separator), suitable for a variety of installation scenarios and air source treatment requirements. Working range: The fluid used is compressed air, the inlet air temperature is -5 ~ 55℃, the inlet air pressure is 0.3 ~ 0.85MPa, and the ambient temperature is -5 ~ 55℃. Interface specifications: Usually the thread type is Rc and the nozzle diameter is 1/8 inch (the specific interface specifications can be confirmed according to the actual product). |
SMC |
In Stock |
QB全新保内 |
|
|
|
|
SMC Dryer IDG3-02 belongs to the polymer film air dryer, with the following characteristics: High efficiency water removal: With the help of polymer hollow diaphragm technology, it can efficiently separate the water in the air, and the atmospheric pressure dew point of the output air can reach -60 ℃, which effectively protects the dryness of the air source. Energy saving and environmental protection: no external power supply, no use of freon, no vibration, no heat discharge during operation, both energy saving and environmental protection. Easy maintenance: The overall structure design is simple, no drain. However, IDG3-02 belongs to the IDG1-5 series, and the standard model does not have a dew point indicator, but the overall maintenance difficulty is low, which can reduce maintenance costs and downtime. Flexible installation: compact size, light weight, easy installation, can be combined with the pre-filter (oil mist separator and micro-fog separator), suitable for a variety of installation scenarios. Working range: Suitable for compressed air, inlet air temperature range of -5 ~ 55℃, inlet air pressure of 0.3 ~ 0.85MPa, ambient temperature of -5 ~ 55℃. Under the benchmark performance, the inlet air flow is 37.5L/min (ANR), the outlet air flow is 30L/min (ANR), and the shunt air flow is 7.5L/min (ANR). Interface specification: Thread type is Rc, nozzle diameter is 1/4 inch. |
SMC |
In Stock |
QB全新保内 |
|
|
|
|
SMC Dryer IDG30A-03 is a polymer film air dryer, which has the following characteristics: High efficiency dehumidification: With the polymer diaphragm technology, the water in the compressed air is efficiently removed, and the atmospheric pressure dew point of the output air can be reduced to -60 ° C to ensure that the air source is highly dry. Energy saving and environmental protection: no external power supply is required for operation, no freon refrigerant is used, no vibration and no heat discharge during the working process, significantly reducing energy consumption and environmental burden. Easy maintenance: the overall structure is simple, no drainage, although the standard type no dew point indicator, but the equipment maintenance difficulty is low, can effectively reduce maintenance costs and downtime. Easy installation: small size, lightweight quality, easy to install, can be paired with pre-filter (such as oil mist separator, micro fog separator) work together, suitable for a variety of installation space and air source treatment scenarios. Operating parameters: Suitable for compressed air, inlet air temperature of -5 ~ 55℃, inlet pressure of 0.3 ~ 0.85MPa, ambient temperature of -5 ~ 55℃. Under the benchmark performance, the inlet air flow is 375L/min (ANR), the outlet air flow is 300L/min (ANR), and the shunt air flow is 75L/min (ANR). Interface specification: Thread type is Rc, nozzle diameter is 3/8 inch. |
SMC |
In Stock |
QB全新保内 |
|
|
|
|
SMC Dryer IDG30LA-02B-P is an excellent polymer film air dryer with the following characteristics: High efficiency dehumidification: The use of polymer diaphragm technology can efficiently filter the water in the compressed air, and the atmospheric pressure dew point of the output air can be as low as -60 ℃, ensuring that the air source is highly dry, and meeting the requirements of the application scenarios with strict air quality. Energy saving and environmental protection: no external power supply, no freon refrigerant, no vibration and heat discharge problems, significantly reduce energy consumption and environmental impact, in line with the concept of green environmental protection. Easy maintenance: The overall structure design is simple, no need for drainage, equipment maintenance difficulty is low, even if the standard type is not equipped with dew point indicator, it can effectively reduce maintenance costs and downtime. Easy installation: The device is small in size, light in weight, easy to install and arrange, and can be used with the pre-filter (such as oil mist separator, micro fog separator), suitable for a variety of installation space and air source treatment requirements. The "B" in the model indicates that there is a bracket and a splitter air discharge connector to facilitate equipment installation and air splitter operation; The "P" may represent a special material or a specific process to further optimize product performance. Operating parameters: Suitable for compressed air, inlet air temperature of -5 ~ 55℃, inlet pressure of 0.3 ~ 0.85MPa, ambient temperature of -5 ~ 55℃. Under the benchmark performance, the inlet air flow is 300L/min (ANR), the outlet air flow is 240L/min (ANR), and the shunt air flow is 60L/min (ANR). Interface specification: The thread type is Rc, the nozzle diameter is 1/4 inch, easy to connect the pipe system. |
SMC |
In Stock |
QB全新保内 |
|
|
|
|
SMC Dryer IDG30LA-03 is a practical polymer film air dryer with the following significant features: High efficiency water removal: The use of polymer diaphragm technology, can efficiently remove the water in the compressed air, the output air pressure dew point can reach -60 ℃, ensure the air source dry, suitable for the air quality requirements of the scene. Energy saving and environmental protection: no external power supply, no freon refrigerant, no vibration, no heat discharge during operation, reduce energy consumption and reduce the impact on the environment. Easy maintenance: The overall structure is simple, no need for drainage, equipment maintenance difficulty is low, can effectively reduce maintenance costs and downtime. Easy installation: small size, light weight, easy to install, can be used with oil mist separator, micro fog separator and other pre-filter combination, suitable for a variety of installation space. Interface adaptation: The thread type is Rc, and the nozzle diameter is 3/8 inch, which is convenient to connect various pipe systems and ensure smooth air circulation. |
SMC |
In Stock |
QB全新保内 |
|
|
|
|
SMC Dryer IDG30LA-F02 is a high molecular film air dryer with excellent performance, with the following characteristics: High efficiency dehumidification: With the help of polymer hollow diaphragm technology, the water in the compressed air is efficiently filtered, and the atmospheric pressure dew point of the output air can be as low as -60 ℃, ensuring that the air source is highly dry, meeting the application scenarios with high air quality requirements. Energy saving and environmental protection: no external power supply, no freon refrigerant, no vibration, no heat exhaust phenomenon, greatly reduce energy consumption, in line with environmental protection requirements. Easy maintenance: The overall structure is simple, there is no need for drainage, the equipment maintenance difficulty is low, and the maintenance cost and downtime can be effectively reduced. Easy installation: small size, light weight, easy to install layout, can work with oil mist separator, micro fog separator and other pre-filters, suitable for a variety of installation space. Interface characteristics: The thread type is G, the nozzle diameter is 1/4 inch, which is convenient to connect with various pipeline systems and ensure the smooth air circulation. |
SMC |
In Stock |
QB全新保内 |
|
|
|
|
SMC Dryer IDG3-F02-PS is a practical polymer film air dryer with the following significant features: High efficiency water removal: The use of polymer hollow diaphragm technology, effectively remove the water in the compressed air, the atmospheric pressure dew point of the output air can be as low as -60 ℃, providing high quality guarantee for the scene requiring high dryness of the air source. Energy saving and environmental protection: no external power supply, no freon, no vibration, no heat discharge during operation, both energy saving and environmental protection, reduce energy consumption and environmental impact. Easy maintenance: simple structure design, no need for drainage, low maintenance difficulty, can effectively reduce maintenance costs, reduce equipment downtime. Easy installation: small size, light weight, easy to install, can be used with oil mist separator, micro fog separator and other pre-filters, to meet different installation space requirements. The "PS" in the model may represent a specific feature or material upgrade that further optimizes product performance. Interface adaptation: The thread type is G, and the nozzle diameter is 1/4 inch, which is convenient to connect with various pipeline systems and ensure the smooth air transportation process. |
SMC |
In Stock |
QB全新保内 |
|
|
|
|
SMC Dryer IDG3-F02-S is a functional polymer film air dryer with the following features: High efficiency dehumidification: The polymer hollow diaphragm technology can efficiently remove moisture from compressed air, and the atmospheric pressure dew point of the output air is as low as -60 ℃, which can meet the application scenarios that require strict dryness of the air source. Energy saving and environmental protection: no external power supply, no use of freon, no vibration, no heat discharge, and reduce the impact on the environment while saving energy. Easy maintenance: The overall structure is simple, no need for drainage, low maintenance difficulty, effectively reduce maintenance costs and equipment downtime. Easy installation: The equipment is small in size, light in weight, easy to install, and can be used with oil mist separator, micro fog separator and other pre-filters to adapt to different installation Spaces. The "S" in the model may represent a specific feature or material to further optimize product performance. Interface specification: Thread type is G, nozzle diameter is 1/4 inch, easy to connect with all kinds of pipes, to ensure smooth air flow. |
SMC |
In Stock |
QB全新保内 |
|
|
| |
